London Mayor to Whack President Obama’s Motorcade with the Congestion Charge

Unless you’ve been living under a rock for the past week or so, you’d have seen that hi-larious [sic] video of one of the Barack-mobiles getting stuck on a ramp outside the U.S. Embassy in Ireland. The U.S. President’s eight ton, “Beasts” are monsters of cars, built to withstand bullets, bombs and probably reporters’ shoes (yes, I went there).

In a cute footnote to this story, notorious car-hater environmentally-conscious London Mayor Boris Johnson is considering levying a congestion charge on each car in President Obama’s motorcade, the cost of which would be £10 (US$16) per vehicle. A spokeswoman has stated that they will not be paying the charges if billed.

Read more »

Last Cadillac DTS Heads to Bulgari Collection

It may not be anywhere close to being a historic model for Cadillac, but for some, the outgoing DTS has a special place in their wish list. In fact so special that Nicola Bulgari of the renowned Italian jewelry, perfume and more recently hotel chain family, decided to add the last DTS to roll off the production line to his personal car collection.

“Is it important?” Nicola Bulgari asked. “Is it the number or the quality that matters? It’s the quality. I like the DTS because it’s a great sedan,” said Bulgari. “It’s the last of an era. I thought it would be wonderful to own the last Northstar in a DTS. It’s one of the best engines ever designed – reliable and a performer.”

Read more »

President Obama’s Cadillac gets Trapped on a Ramp in Ireland

The heavily armored Cadillac that U.S. President Obama relies on for short-distance travel caused an embarrassing moment during his trip in Dublin, Ireland, today when it got jammed on a ramp after exiting the U.S. Embassy's complex. The first cars from the presidential motorcade passed without problems through the gates of the Embassy, but a BMW 7-Series preceding the Cadillac slightly touched the asphalt.

The Presidential Cadillac, nicknamed ‘The Beast’, came next and hit the ground much harder and was immobilized. "There was a loud kind of bang, metal-on-metal, grinding, crunching noise and the car was stuck," an RTE reporter told the AFP.

Read more »

FAB Design's Cadillac Escalade Proves Money Can't Buy Taste

Swiss-based tuning firm Fab Design will no doubt raise a few eyebrows with its most recent work on the Cadillac Escalade. Roland Rysanek, the owner of the aftermarket company, which specializes on Mercedes-Benz models, found himself in front of a dilemma when asked by a North African client to modify the heavyweight American SUV.

Rysanek eventually accepted the job, as the eccentric owner was a loyal client with plenty of Fab Design Mercedes models parked in his garage. Anything for a devoted customer, right? Well, this particular client wanted the car to look like no other Escalade and to have an interior lined with genuine snake leather and crocodile-imitating leather – lots of it.

Read more »

BMW 3-Series Still Top Dog despite Strong Competition

In the ingloriously named, “small premium car segment”, the BMW 3-Series is king. A good all-rounder with sporting pretensions and cred, a nice assortment of engine and equipment options, and perhaps most importantly, a variety of body styles including a coupe and station wagon derivative that have ensured its market supremacy.

All 3-Series models are doing their bit to keep sales high. According to a study released by R.L. Polk & Co., from 2008 through this past February, the 3-Series sedan covered around 60 percent of the model's retail registrations, with the coupe, convertible and station wagon versions accounting for the rest of the sales.

Read more »

2012 Cadillac CTS Sedan, Coupe and Wagon Gain New Grille and Updated V6 with 318HP

You may be hard pressed to visually identify the changes over the current version by looking at the above photo, but the Cadillac CTS range has received an update for the 2012 model year that brings a redesigned grille, a revised V6 engine and a new Touring Package edition. The improvements will be carried over to all three CTS models, including the Sedan, the Coupe and the Sport Wagon, with first deliveries expected in late summer. Read more »

California Set to Slash Lawmakers' Vehicle Costs in Half, No More Freebies

In an attempt to help reduce California's $26.6 billion deficit, the state's Citizens Compensation Commission has decided that members of the Senate and Assembly who drive state-sponsored vehicles will have their annual vehicle costs cut from $7,453 to $3,600. That boils down to $300 per month for expenses (gas, insurance, etc.), and oh, they'll have to drive their own cars as of December…

California lawmakers average an income of $131,000 per year before retirement benefits, and reducing vehicle costs is one minor cut that's being made for the betterment of the whole. Some people thought the measure was a bit too broad, not taking into account lawmakers' locations.

Read more »

Hennessey's HPE1000 Escalade Cracks 60 in 3.3 Sec, bests Nissan's GT-R [with Video]

The concept of turning SUVs into pavement-pounding, drag-racing, supercar-shredding monster rods never ceases to amaze me, and by that I mean my jaw is on the floor and I'm completely boggled. I love me some automobiles (and vehicular transportation in general), but there's something about a nigh-three ton box on wheels and oodles of GO that seems...weird.

However, if monster rods - or high performance in general - are your cup of Starbucks soy latte, then Hennessey has got you covered (as if you didn't know that already, what with their cray-cray 1,000+ horsepower Vipers from way back when). Below, for your viewing pleasure, is video of a 2011 Cadillac Escalade drag racing a 2011 R35 GT-R and beating it.

Read more »

Cadillac Escalade 2011 vs Nissan GT-R

Parece covardia, né? Mas veja o vídeo abaixo e confira que apesar do tamanho todo o Cadillac Escalade mostra que não esta para brincadeira. O SUV tem dois turbos e 1.000 cv de potência e vai de 0 a 100 km/h em 3,3 segundos. Já o GT-R tem “apenas” 485 cavalos e vai de 0 a 100 km/h em 3,4 segundos.

Cadillac Sports Cars Aera lightweight Concept Car

Cadillac Sports Cars Aera lightweight Concept Car

This is the Cadillac Aera (Aero + Era) launches Cadillac's philosophy of "Art and Science" into new territory by taking an innovative and stylistic approach to ultra-light weight vehicle design. LOS ANGELES – The Cadillac Aera concept vehicle won the 2010 Los Angeles Auto Show Design Challenge, tying with Smart and besting entries from seven other automakers including Mercedes-Benz, Honda, Nissan, Toyota and Maybach. GM Advanced Design has now won the honor more times than any other design team.

General Motors advanced design California has come up with a concept cars zero-emission vehicle as part of this year’s LA Auto Show Design Challenge. Cadillac Sports Cars Aera lightweight Concept Car is a 1000 lb, 2+2 touring coupe, with a range of 1000 miles before refueling; attributes achieved without compromising size, capacity and safety. With an ability to seat four, the vehicle uses a body structure made from mono-formed 3D lattice that is extremely sturdy.

Cadillac Sports Cars Aera lightweight Concept Car

This marks the third time that the group from General Motors has won this challenge, giving them the most wins out of all automakers that enter. The Cadillac Aera Concept hit on all areas that the judges were looking for and, despite the futuristic styling, still carries some recognizable lines from Cadillacs of today.

Jussi Timonen, lead designer for the project shared: „The Cadillac Sports Cars Aera concept was designed to continue the forward-thinking imagination of Cadillac’s ‘art and science’ philosophy. It’s designed as a small city urban vehicle, but we approached this 2+2 touring coupe very much from the brand’s luxury perspective. Every detail of the Aera was conceived to minimize the vehicle’s environmental impact without sacrificing the style, comfort and attention to detail that are hallmarks of the Cadillac cars brand.”

Cadillac Sports Cars Aera lightweight Concept Car

The Aera is powered by compressed air via a highly efficient Pneumatic Drive System that has a 10,000-psi composite air storage tank with capacity for a 1,000-mile range. Flexible, pressurized air cells in the exterior skin, similar to material developed for the NASA Mars Rover airbags, enhance passive safety and interior comfort. The flexible polymer skin optimizes aerodynamics and functions as an ultra-lightweight alternative to conventional body panels and glass.

Additional technologies include an All-In-One (AIO) wheel system, combining rotary actuator propulsion, steering and suspension functions. A drive by wireless system decreases the mass of electrical components. Vehicle to vehicle communication (V2V) promotes active safety. The Cadillac Aera embodies a stylistic, lightweight, minimalist approach to long distance luxury touring.

Cadillac Sports Cars Aera lightweight Concept Car

The Design Challenge is part of the Design Los Angeles automobile designers’ conference and has evolved into an integral element of the Los Angeles Auto Show. Design Los Angeles connects those working in the design industry with well-known automotive design industry leaders. Los Angeles is home to the world’s largest concentration of manufacturer design studios, representing automakers from North America, Europe and Asia. It is also the home of Art Center College of Design, one of the world’s foremost transportation design institutions where many of today’s leading automotive designers began their careers.

Cadillac CTS Sport Wagon, 2010

Amidst the beauty and history of the Pebble Beach Concours d'Elegance, Cadillac treats car enthusiasts to a world premiere of its latest production-car design. The 2010 Cadillac CTS Sport Wagon makes its debut on the Monterey Peninsula, showcasing a dramatic design that elevates and updates the classic wagon body style.

The new Cadillac CTS Sport Wagon is an unmistakable and dynamic presence. The car's intricately cut rear profile injects fashion-forward design into the formerly utilitarian world of wagons. Cadillac's upcoming wagon offers ample interior space and includes a range of six-cylinder engine choices, making it a compelling alternative to larger utility vehicles.

Based on the hot-selling Cadillac CTS sport sedan, and a sister vehicle to the Cadillac CTS Coupe Concept, the Sport Wagon extends the design-driven renaissance of Cadillac. Following this special premiere at Pebble Beach, the Cadillac CTS Sport Wagon moves to the worldwide auto show circuit this fall - and into Cadillac dealerships in spring 2009.

A striking profile is created with the Cadillac CTS wagon, with a silhouette that suggests speed and aerodynamic efficiency. It rides on the same 113.4-inch (2,880-mm) wheelbase as the Cadillac CTS sport sedan and is 0.3-inch (7 mm) shorter. However, it offers a generous cargo area of 25 cubic feet (720 liters) behind the rear seats.

Design highlights include:
* Signature V-shaped deck and tailgate motif
* Large, vertical taillamps with light-pipe technology
* Power-opening liftgate (via key fob or in-vehicle button)
* CHMSL integrated in subtle roof spoiler
* Integrated roof load management system with cross bars for a seamless appearance
* Cargo management system with adjustable in-floor containment
* New 19-inch wheels
* Larger available panoramic rear sunroof

The Cadillac CTS Sport Wagon, like its sedan predecessor, includes available features such as all-wheel drive, a 40-gigabyte internal hard drive, pop-up navigation screen and a hand-cut-and-sewn interior with Sapele wood accents.

Design details
Dramatic planes highlight the Cadillac CTS wagon's design, including a V-shaped motif carried throughout the vehicle and carefully integrated intersections of exterior surfaces. The elements coalesce in a dramatic fashion, creating tension that emphasizes the vehicle's performance.

The emotion of the Cadillac CTS Sport Wagon's design is carried by a number of nuanced details. The liftgate area, for example, is a confluence of angles and planes that typifies the vehicle's design tension. Cadillac's "V" motif is most prominent here, culminating in a spine at the center of the liftgate that is accented with a subtle spoiler at the top of the backlight. The rear quarter panels extend slightly beyond the inward-angled planes of the V, creating a distinctive W shape at the rear of the vehicle. Large, prominent vertical taillamps - with Cadillac's signature light pipe technology - are the final, dramatic touches to the rear-end styling.

One of the more interesting integrations of form and function is found in the seamless roof load management system. Rather than stylized stanchions, brackets and cross bars that protrude above the roof line, the Cadillac CTS Sport Wagon's system blends with the roofline, maintaining an uninterrupted appearance. The center section of the roof panel angles downward inside the roof edges, allowing an unobtrusive placement of the cross bars - and creating a subtle fin effect at the trailing edges of the rear panels.
The interior of the Sport Wagon is common with the much-acclaimed sport sedan, including streamlined instrumentation, LED lighting and hand-cut-and-sewn accents with French stitching.

Powertrains
Direct injection technology helps the Cadillac CTS offer more power while maintaining fuel economy and lowering emissions. It delivers fuel more precisely to increase the efficiency of combustion. This means less fuel is consumed and lower emissions created.

With the Cadillac CTS Sport Wagon's 3.6L V-6, direct injection translates to 304 horsepower (227 kW)*, no loss of fuel efficiency and a 25-percent drop in cold-start hydrocarbon emissions. It also runs on less expensive regular unleaded gasoline. The Sport Wagon's fuel economy is expected to be similar to the peak rating of the existing sport sedan's 26 mpg highway rating. The standard 3.6L VVT engine that produces 263 horsepower (196 kW) and 253 lb.-ft. of torque (343 Nm) serves as the base engine in North America.

Like the Cadillac CTS sport sedan, the V-6 engines are matched with fuel-saving six-speed transmissions, including an Aisin six-speed manual or an electronically controlled Hydra-Matic 6L50 six-speed automatic. As is the case on the sport sedan, Cadillac CTS Sport Wagon includes AWD as an option.

An efficient 2.9L turbo-diesel engine is being developed for Cadillac CTS models primarily in European and Asian markets. It is a compact, dual overhead cam, four-valve V-6 engine from GM's family of diesel engines that delivers optimal fuel economy as well as reduced emissions and noise. The engine is rated at 184 kW (250 hp).

Driving dynamics
The robust and dynamic CTS chassis infuses the new wagon with a great balance of performance and luxury. It uses an independent short/long arm ( SLA) front suspension system and a multi-link rear suspension.

The multi-link rear suspension features a fully isolated subframe that helps deliver excellent suspension kinematics, contributing to a superior ride and excellent handling.

Advanced chassis technology in the form of Cadillac's StabiliTrak electronic chassis control system integrates the car's standard four-channel ABS with the full-function traction control, hydraulic brake assist and engine drag control systems to deliver a safer, more confident driving experience. Additional chassis details include a structure-enhancing tower-to-tower brace under the hood; large, four-wheel disc brakes and premium steering.

Cadillac CTS Sport Wagon Preliminary Specifications
* Vehicle type: four-door, five-passenger rear-wheel-drive/all-wheel-drive wagon
* Wheelbase: 113.4" / 2880mm
* Length: 191.3" / 4859 mm
* Width: 72.6" / 1842 mm
* Height: 59.1" / 1502 mm
* Track: 61.8" / 1570 mm (front); 62" / 1575 mm (rear)
* Engines: 3.6L VVT V-6 (263 hp / 196 kW) 3.6L V-6 VVT DI (304 hp / 227 kW)
* Transmissions: Aisin six-speed manual or Hydra-Matic 6L50 six-speed automatic
* Suspension: four-wheel independent: MacPherson strut front; multilink rear, progressive rate coil springs, monotube shock absorbers
* Steering: variable-assist rack-and-pinion
* Brakes: four-wheel disc; aluminum or iron dual-piston front calipers; aluminum or iron single-piston rear calipers
* Wheels: 17-inch, 18-inch or 19-inch aluminum
* EPA luggage capacity: 25 cu ft / 720 l (behind rear seats)
* EPA total volume: 121.9 cu ft / 3452 l

Cadillac Converj Concept

With the Cadillac Converj Concept General Motors unveiled a further glimpse at the potential of electric propulsion, this time in the form of luxury transportation. The Cadillac Converj was developed as a well-appointed grand touring coupe with a bold design and a host of interactive technology.

The four-passenger Cadillac Converj concept is intended to show how GM's revolutionary electric propulsion technology - called Voltec - can power a luxury coupe with a typically Cadillac "no compromises" design. The technology enables up to 40 miles of gas- and emissions-free electric driving with extended-range capability of hundreds of miles.

Cadillac's extended-range electric vehicle (E-REV) concept has a new body style that is an evolution of the brand's traditional Art and Science design theme. An aggressive, forward-leaning arc profile is the foundation for the sporting stance. And more than a Cadillac in form, Converj is also intended to be a Cadillac in substance, with the premium materials, technology and driving dynamics that are hallmarks of the brand.

Voltec - innovative propulsion technology
The Cadillac Converj's Voltec electric propulsion system is made up of a 16-kWh, T-shaped battery, an electric drive unit, and a four-cylinder engine-generator. It uses electricity as its primary source to drive the car.

A thermally managed battery pack contains more than 220 lithium-ion cells that provide the primary power to drive the Cadillac Converj electrically up to 40 miles without using fuel or producing tailpipe emissions. The battery is integrated into the Cadillac Converj's chassis and stores electricity from the grid when the vehicle is plugged in. It takes less than three hours to recharge the battery at 240V, or about eight hours from a 120V outlet.

When the battery's energy is low, the Cadillac Converj seamlessly switches to extended-range mode. During this secondary level of operation, electricity needed to power the vehicle is created on-board by a flex-fuel-powered engine that operates much like a home generator to create electricity. The engine-generator ensures a constant supply of power for hundreds of miles until the car is refueled or plugged in to recharge the battery. This extended-range mode eliminates the range anxiety that comes with driving pure electric vehicles that offer no backup power when the battery charge is low.

Whether in electric or extended-range mode, the Cadillac Converj is propelled all the time by an electric drive unit. It converts electrical energy from the battery or the engine-generator into mechanical energy to drive the front wheels. It also delivers 273 lb.-ft. (370 Nm) of instant torque, for a quick launch, and 120 kW of power. The top speed is 100 mph.
There is no compromise in vehicle performance in either mode of operation. To enhance the ride feel, the Cadillac Converj Concept also features GM's Magnetic Ride Control; and for even greater efficiency, energy during braking is captured and stored in the battery.

Pure Cadillac design :
There's no mistaking the Converj for anything but a Cadillac, according to Lutz. "An aggressive, forward-leaning profile hints at a new, progressive theme and proportion in Cadillac's design evolution," he says. "The new proportion showcases a uniquely shaped, modern vision of a personal luxury 2+2."
The overall shape is reinforced by a prominent, sweeping body line with large, 21-inch (front) and 22-inch (rear) wheels pushed to the edges of the body. The Cadillac Converj exterior is painted a dark silver tri-coat that GM designers dubbed "Reaction."

An all-glass roof incorporates solar panels that help offset power drain from the vehicle's accessories.
Additionally, several aerodynamic and design efficiencies were incorporated to enhance the driving range, including:
* A full under-vehicle cover (belly pan)
* Minimal grille openings that reduce drag at the front of the vehicle
* Low-profile rearview cameras replace conventional outside mirrors to reduce drag
* Wheels are shaped to push air outward for smoother body side airflow
The Cadillac Converj also incorporates vertical headlamp and taillamp elements, with light pipe technology.

The Luxury meets technology inside
The Cadillac Converj's interior has advanced features and luxurious appointments blending efficiency and environmental consciousness. The 2+2 configuration is trimmed in contrasting Winter White synthetic suede - including the top of the instrument panel - and Midnight Black leather, with polished aluminum and wood grain accents.

A technologically advanced driver center increases efficiency and reduces the draw on the battery.

Features:

* New, organic light-emitting diode technology used on reconfigurable instrument cluster
* Touch-screen navigation, climate, center-stack controls and audio systems
* Adjustable, overhead white ambient lighting
* Unique "power on" sequence featuring blue-lit console graphics
* Screen displays for features including regenerative braking, battery charge level and power output
* No inside rearview or outside mirrors; cameras provide surrounding images on a screen placed high on the instrument panel for a full, panoramic view
* Push-button ignition and power-folding front seats

Cadillac SRX

The Cadillac unveiled the next-generation 2010 Cadillac SRX Crossover, featuring a completely new design and more-efficient, high-technology engine choices. The new Cadillac SRX is a mid-sized luxury crossover.

The 2010 Cadillac SRX is designed for efficient performance, including the choice of two high-tech six-cylinder engines that are new to Cadillac. A new, 3.0L direct injected and E85 capable V6 engine is standard and a new, 2.8L turbocharged V6 is optional. Both engines employ technology that helps produce strong performance that is typical of larger-displacement engines. Direct injection enables a 25-percent reduction in hydrocarbon emissions. Fuel economy in the mid-20s on the highway is expected, but testing isn't yet complete.
The performance and safety are enhanced by an available all-wheel-drive (AWD) system that is designed to optimize vehicle handling and stability in all driving conditions. The AWD system includes an advanced electronic limited-slip differential (eLSD) that distributes torque as needed from side-to-side along the rear axle, in addition from the front to rear axle. The pre-emptive, active-on-demand system provides an extra measure of capability in wet or icy conditions.
The 2010 SRX rides on a wide track that was designed to deliver a nimble, responsive driving experience. It seats five, with generous occupant and cargo room, and can tow up to 3,500 pounds (1,587 kg).

Distinctive design and craftsmanship
A multi-piece shield grille and Cadillac's iconic vertical headlamps - with light pipe technology and available adaptive forward lighting - are the face of the Cadillac SRX. They blend into a tightly wrapped, sweeping body that tapers downward at the rear, giving the vehicle a sporty profile, Dean said.

The Cadillac SRX features a wide stance, minimal overhang and wheels pushed to corners. Eighteen-inch wheels are standard and 20-inch wheels are offered. A bold accent line dives across the body side and culminates at a chrome front fender vent that incorporates a side marker lamp. An integrated spoiler on the rearward edge of the roof extends the sleek lines and improves aerodynamics.
An integrated center stack houses controls for climate and audio systems, while the navigation system rises from the center of the instrument panel. A signature example of the SRX's attention to detail is the Cadillac script logos in the front door sill plates that illuminate when the doors are opened.

Advanced technology and entertainment systems
The 2010 Cadillac SRX features numerous advanced electronic features. Highlights include a "pop-up" navigation screen featuring 3D imaging; adaptive forward lighting that swivels the headlamps in synch with vehicle steering; power liftgate with adjustable height setting; integrated hard disc drive for audio storage and a dual-screen system for rear entertainment.
Bluetooth compatibility is standard, as is OnStar's turn-by-turn navigation service for buyers who do not select the car's navigation system option.

Efficient performance
The Cadillac SRX is powered by a new, fuel-efficient direct injected 3.0L V6 that delivers an estimated 260 horsepower (193 kW) and is paired with a six-speed automatic transmission. Direct injection results in more power, better fuel economy and lower emissions, all will a smaller-displacement package. As a result, the new V6 engine is expected to raise the SRX's standard power rating by 5 horsepower, while achieving an estimated 10-q5-percent fuel economy improvement.

The 3.0L direct injection V6 is a smaller-displacement version of the 3.6L, direct injection engine featured in the Cadillac CTS sport sedan and named one of the world's 10 Best Engines for 2009 by Ward's Automotive. Along with direct injection technology, the 3.0-liter engine employs variable valve timing to optimize power and fuel efficiency and reduce emissions.
The Hydra-Matic 6T70 six-speed automatic transmission helps save fuel by lowering the engine's revolutions per minute at constant highway speeds, while a manual shift lever control enables greater driver interaction when desired. The new Cadillac SRX includes a driver-selectable "eco mode" that alters transmission shift points to maximize fuel economy.

Traction control is taken a step further on AWD models with the rear eLSD. In icy or wet conditions, the system can transfer up to 100 percent of torque to the wheel that has more grip. The eLSD also gives the driver enhanced control when cornering hard or completing a high-speed maneuver, such as a lane change, by momentarily applying more or less torque to either of the wheels to help the rear of the vehicle more closely follow the direction of the front wheels.
The suspension includes a real-time damping system in conjunction with AWD that adjusts shock damping rates in response to road conditions for smooth ride quality.

Enhanced safety
The Cadillac SRX's safety features are designed to protect occupants before, during and after a crash. A strong body structure and chassis that absorbs crash energy is complemented by the use of martensitic steel in the fully enclosed rocker sections. Martensitic steel is one of the strongest available and its use in the rockers helps protect against intrusion during a side-impact crash, while also maintaining the structure during front and rear crashes.

The safety features include standard head curtain side airbags, standard front seat-mounted pelvic/thorax side airbags, front safety belts with dual pretensioners and load limiters, rollover mitigation sensors, a pedal release system, trailer stability assist and OnStar.
The Cadillac SRX was also designed to meet European pedestrian protection standards; and the front bumper is positioned for greater compatibility with car bumpers.

Cadillac Presidential Limousine, 2009

As Americans celebrate the inauguration of a new president of the United States, another new Cadillac will grace Pennsylvania Avenue to lead the proceedings. President Barack Obama will ride in an all-new Cadillac Presidential Limousine, continuing a long tradition of Cadillac limousines that have served many U.S. presidents.

The image of an American president greeting crowds from a Cadillac limousine dates to President Woodrow Wilson and the early days of the automobile, and continues into a historic new era. The latest Cadillac Presidential Limousine is a completely new design, succeeding the DTS Presidential Limousine that debuted in 2004. The new car incorporates many of the dramatic design and technology features of new and highly acclaimed Cadillac vehicles in a purpose-built format tailored to specific and exacting specifications befitting presidential transport.

Inside and out, the Cadillac Presidential Limousine includes many of the brand's signature design elements. Assertive, modern and elegant, the front of the car includes the intricate, dual-textured grille made famous by Cadillac's most popular current models, the CTS sport sedan and Escalade. Vertical design elements, such as the car's front and rear lighting, mirror those used on production models.

For largely functional reasons, such as optimal outward visibility, the car is slightly more upright than its predecessor. However, this new Cadillac Cadillac Presidential Limousine occupies roughly the same overall footprint on the road as the previous model, with a similar size and proportion.

The side and rear profiles of the new Cadillac Presidential Limousine are classic, elegant forms, evocative of Cadillac's STS and DTS luxury sedans. Inside the cabin, the car includes the finest examples of Cadillac's recent renaissance in design, technology and craftsmanship. The cabin blends modern design and technology with old-world craftsmanship. Major aspects of the cabin are cut and sewn by hand, the same process used in popular Cadillac models such as the CTS sport sedan.

Naturally, many purpose-built aspects of the car are specially designed and prepared for presidential use. The rear passenger area includes an extensive executive compartment with ample seating space, outward visibility and useful mobile office features.

The car was designed, developed and tested by specialists who adhered to an extensive set of specifications. It was subjected to an extreme testing regimen to ensure performance that achieves precise functional requirements. In doing so, security provisions were undertaken at all times during development to ensure the car's functional capabilities are preserved and confidential.

An embroidered presidential seal is positioned in the center of the rear seat back panel, as well as on each rear door trim panel. Presidential seals are also affixed to the exterior rear doors. The U.S. flag is placed on the right front fender, and the presidential standard is located on the left front fender when the president travels in the vehicle. High-tech LED spotlights illuminate the flags at night.

History - Cadillac and the U.S. Presidency
Cadillac has built limousines and special vehicles for U.S. presidents, diplomats, ambassadors and foreign dignitaries since the early 20th century, an iconic aspect of the brand that continues today.

Cadillac's central role began during World War I, when many Cadillac engines and cars were transferred to military and government service because of their superior durability and power. One of the first chief executives to use a Cadillac was President Wilson, who rode through the streets of Boston during a World War I victory parade in 1919. A lavish 1928 Cadillac town car was used in the Calvin Coolidge administration.

In 1938, two Cadillac convertibles, dubbed the "Queen Mary" and "Queen Elizabeth," were delivered to the U.S. government. Named after the great ocean liners of the time, the vehicles were 21.5 feet long, weighed 7,660 pounds and were equipped with a full ammunition arsenal, two-way radios and heavy-duty generators. Durable and reliable, the two "Queens" served Presidents Franklin D. Roosevelt, Harry S. Truman and Dwight D. Eisenhower.

President Eisenhower, known as a car buff, rode in one of the first Cadillac Eldorado models ever produced during his 1953 inaugural parade. The Eldorado represented a high point in automobile design history, as it had the first wraparound windshield, a feature quickly adopted on other new production models.

In 1956, the Queen Mary II and Queen Elizabeth II convertibles replaced the original series. The vehicles were slightly smaller, but like their predecessors, were fully armored and featured state-of-the art communications. Moreover, the vehicles were fitted with narrow rims inside the tire in case the tires were shot out. The Queen Mary II and Queen Elizabeth II served not only President Eisenhower, but also Presidents John F. Kennedy and Lyndon B. Johnson. Both vehicles were retired in 1968.

The Ronald W. Reagan administration was delivered a 1983 Cadillac Fleetwood limousine and a Cadillac Fleetwood Brougham - Presidential Series was delivered to the William J. Clinton administration in 1993. Unlike previous models that typically were Cadillac cars adapted and modified by independent limousine companies, the 1993 Presidential Brougham was designed, developed and manufactured totally within General Motors and Cadillac. This included an extensive set of security measures to maintain confidentiality, a process that continues today.

Currently, the 1983 Cadillac Fleetwood limousine resides at the Ronald W. Reagan Presidential Library and Museum in Simi Valley, Calif., while the 1993 Cadillac Fleetwood Brougham is at the Clinton Presidential Center in Little Rock, Ark.

Cadillac has produced 2 presidential limousines this decade that remain in service. The first was a Deville Presidential model delivered to President George W. Bush in 2001. In 2004, President Bush debuted a new DTS Presidential model. It was the first application of a new design that launched later that year for the production DTS full-size sedan.

Cadillac CTS-V, 2009

As the new CTS sport sedan earns accolades and new owners, Cadillac takes the next leap forward by premiering the 2009 Cadillac CTS-V, the brand's ultimate expression of performance and luxury.

Launching in the fourth quarter of 2008, the all-new Cadillac CTS-V intends to combine the serious performance of an elite sports car with the poise and elegance of a prestigious luxury sedan. Part of Cadillac's acclaimed V-Series of high-performance models, CTS-V delivers an estimated 550 horsepower (410 kW). More than just power, CTS-V also includes a comprehensive suite of technical and design enhancements, including Magnetic Ride Control, an industry-first Performance Traction Management program and the addition of a new automatic transmission with paddle-shift control.

Several key technical and design elements combine to transform the already highly capable CTS into the new V-Series. Like the existing CTS, the V-Series is the product of an intensive development process across North America and Europe, including famed test tracks and millions of miles of road. Supporting Cadillac's ongoing global expansion, the 2009 Cadillac CTS-V is planned to be offered outside North America for the first time, including exports to Europe, the Middle East and Asia.

Sophisticated technical enhancements
The 2009 Cadillac CTS-V features the world's fastest-reacting suspension technology, Magnetic Ride Control (MRC). It uses shocks controlled by electro-magnets, rather than mechanical valves, greatly accelerating response time. Electronic sensors at all four wheels literally "read the road" every millisecond, making constant adjustments to damping to create virtually instantaneous and extremely precise control of body motions. This is of particular benefit for a high-performance sedan, helping to keep the car very composed during hard cornering, acceleration, braking and other dynamic maneuvers.

Enabling the precise control expected in a high-performance sedan, the CTS-V features Performance Traction Management system, borrowed from championship racing teams. This technology uses advanced electronics to manage engine torque for optimal traction during acceleration. In situations such as acceleration from a stop or exiting corners, Performance Traction Management regulates torque delivery for the best possible launch.

Performance Traction Management uses the same sort of electronics as stability control programs such as Cadillac's StabiliTrak system, but applies it in a different manner. Rather than monitoring and controlling wheel slip to assist in stopping or slowing the car, PTM regulates torque delivery to instantly match the available tire grip for maximum acceleration.

Accentuated design elements
The 2009 CTS-V extends Cadillac's acclaimed design language, both inside and out. The V-Series includes all the elements of the CTS sport sedan's well received cabin, while adding some elegant and purposeful accents.

V-Series, Recaro performance driving seats, providing excellent support for spirited driving and adding to the luxurious and purposeful interior. These new, 14-way adjustable performance seats include pneumatic bolster controls in the seat cushion and backrest.

A microfiber material is added to the steering wheel, seats and shifter, providing the soft feel and luxurious appearance of suede without suede's inherent drawbacks of difficult care and moisture sensitivity. These accents on the steering wheel, seat inserts and shifter are elegant to the touch and help support high-performance driving.

The car's integrated center stack is trimmed with a new Obsidian material that is also applied to the center console and door trim. Just like every CTS, the V-Series includes a hand-stitched instrument panel, door trim and center console. Leading-edge infotainment features, including a 40-gigabyte hard drive, advanced navigation system with a "pop-up" screen and Bose digital surround audio, extend to the V-Series, as well as factory-installed Bluetooth capability.

CADILLAC CTS-V: PRELIMINARY SPECIFICATIONS
Engine

• Type: 6.2L supercharged V-8 (LSA)
• Displacement (cu in / cc): 376 / 6162
• Bore & stroke (in / mm): 4.06 / 103.25 x 3.62 / 92 mm
• Block material: cast aluminum
• Cylinder head material: cast aluminum
• Valvetrain: overhead valve, 2 valves per cylinder; 0.492-in (12.5 mm) lift
• Supercharger: Gen. 6 R19 with single brick intercooler; 1.9L displacement w/4-lobe rotor design
• Fuel delivery: SFI; center feed
• Ignition: direct-mount ignition coils; extended-life dual platinum-tipped spark plugs
• Compression ratio: 9.0:1
• Horsepower (hp / kW @ rpm): 550 / 410 @ 6200 (est)
• Torque (lb-ft / Nm @ rpm): 550 / 745 @ 6200 (est)
• Recommended fuel: premium recommended but not required

Chassis & Suspension

• Front suspension: independent SLA; 29-mm hollow stabilizer bar; elastomeric handling and ride bushings; 65-N/mm spring rate; Magnetic Ride Control with electro-magnetically controlled shocks
• Rear suspension: independent SLA; 24-mm solid stabilizer bar; elastomeric trailing arm bushing; 90-N/mm spring rate; Magnetic Ride Control with electro-magnetically controlled shocks

Wheels

• 19 x 9-inch; forged alloy, 5-lug (front)
• 19 x 9.5-inch, forged alloy, 5-lug (rear)

Tires

• 255/40R19 Michelin PS2; summer Z-rated (front)
• 285/35R19 Michelin PS2; summer Z-rated (rear)

Brakes: four-wheel disc with four-channel ABS, hydraulic brake assist and dynamic rear brake proportioning
Steering ratio: 16.1:1
Turn radius (ft / m): 37.9 / 11.55

Dimensions

• Wheelbase (in / mm): 113.4 / 2880
• Length (in / mm): 191.6 / 4866
• Width (in / mm): 72.5 / 1842
• height (in / mm): 58.0 / 1472
• Track (in / mm):
• Front: 61.8 / 1570
• Rear: 62.0 / 1575
• Curb weight (lb / kg):
• o manual: 4200 / 1905 (est)
• o automatic: 4300 / 1950 (est)
• Weight distribution (% front / rear): 54 / 46
• Approach Angle (deg): 10.4
• Departure Angle (deg): 18.3
• Tumblehome (deg): 24.6

2010 Cadillac Sports Cars Concept SRV Concept Cars

This is the concept of next Cadillac. This concept is an idea from its Wayne Cherry who is responsible in making design concept. After a distinguished career at General Motors that culminated in his being appointed only the fifth vice president of design in the company’s history, he decided to build a concept car of his own.

2010 Cadillac Sports Cars SRV Concept

Wayne Cherry has always loved concept cars. Then you take a close look at Cherry’s VSR street rod, at the hardware, the workmanship, and, most of all, the design, and you realize it could easily take center stage as a concept car on the GM stand at the next international auto show.

"You just can't stop designing, you just can't stop being involved with cars," Cherry explains. "You start to do something like this, and it turns into a concept vehicle." He makes it sound like a winter garage project that got a little out of control, which at a basic level perhaps isn't a million miles from the truth. 

Then you take a close look at Cherry's VSR street rod, at the hardware, the workmanship, and, most of all, the design, and you realize it could easily take center stage as a concept car on the GM stand at the next international auto show.

He joined GM in 1962, straight out of California’s Art Center design school, and was assigned to the advanced design studio at the Tech Center, where, among his first assignments, he assisted on a project that became the first Oldsmobile Toronado, one of the high watermarks of Bill Mitchell’s stint as GM design chief.

At Vauxhall, he worked on the gullwing XVR, the brand's first-ever concept car, which was unveiled at the 1966 Geneva show. His wild, mid-engine SRV, shown at the 1970 Earls Court Motor Show in London, was a four-door, four-seater that stood just 41 inches tall. 

The Equus, one of the star concepts of 1978, was a crisp, state-of-the-moment roadster that rivaled the best from Bertone and Pininfarina. "That's the most uncompromised design I've ever worked on," Cherry said at the time.

Concept car : Cadillac Bringing CTS-V Coupe 2010

Cadillac has revealed that a V-Series high-performance variant of the new 2011 Cadillac CTS Coupe will share the spotlight with a new concept at the Detroit auto show next month. The concept is believed to be a pre-production version of either the ATS or XTS small and large cars that Cadillac has been teasing over the past year or so.



So far, Cadillac has released only this tightly cropped teaser picture of the unnamed concept and the promise that it will showcase the latest advances in Cadillac's Art and Science design language. While the picture purposely obscures the vehicle, we can see that it is a sedan and bears significant resemblance to the current CTS but with new headlights and mirrors likely too small to see production.

Based on information provided by our own Todd Lassa during a no-photographs open house at GM headquarters back in August, we believe this concept is the XTS. Lassa described the XTS as having a short axle-to-dash ratio and a grille that blended styling elements of the Sixteen and Converj concepts. The car he was shown was also painted gray while the ATS was painted blue, though GM has had more than enough time to repaint them. The ATS, meanwhile, was described as having a shorter, wider grille to make the car look wider, not taller. This picture appears to suggest a larger car, but the angle makes it difficult to be certain.

If it is the XTS, it will most likely be built on a stretched version of GM's Epsilon II FWD architecture and will likely feature the 3.6L direct-injection V-6 engine and will offer AWD. If it's the ATS, it will be RWD-based and will likely utilize both V-6 and four-cylinder engines. Both cars are planned for a 2011 debut likely as 2012 models.



Full Story<<